@venus-> sh ./test-nanobsd-img.sh

SeaBIOS (version rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org)

iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F908D0+07EF08D0 CA00

Booting from Hard Disk...

1  FreeBSD
3  FreeBSD

F6 PXE
Boot:  1
/boot/config: -h -S115200
Consoles: serial port
B

IOS drive A: is fd0
BIOS drive C: is disk0
BIOS 639kB/129920kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
|
-  ______               ____   _____ _____
  |  ____|             |  _ \ / ____|  __ \
  | |___ _ __ ___  ___ | |_) | (___ | |  | |
  |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
  | |   | | |  __/  __/| |_) |____) | |__| |
  | |   | | |    |    ||     |      |      |
  |_|   |_|  \___|\___||____/|_____/|_____/
                                                 ```                        `
 +-----------Welcome to FreeBSD------------+    s` `.....---.......--.```   -/
 |                                         |    +o   .--`         /y:`      +.
 |  1. Boot Multi user [Enter]             |     yo`:.            :o      `+-
 |  2. Boot Single user                    |      y/               -/`   -o/
 |  3. Escape to loader prompt             |     .-                  ::/sy+:.
 |  4. Reboot                              |     /                     `--  /
 |                                         |    `:                          :`
 |  Options:                               |    `:                          :`
 |  5. Kernel: default/2kernel (1 of 1)    |     /                          /
 |  6. Boot Options                        |     .-                        -.
 |                                         |      --                      -.
 |                                         |       `:`                  `:`
 |                                         |         .--             `--.
 +-----------------------------------------+            .---.....----.
   Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop

Loading kernel...
/boot/kernel/kernel text=0x71ff99 data=0x708f0+0x1fb768 syms=[0x4+0x898b0+0x4+0xf100d]
Loading configured modules...
can't find '/boot/entropy'
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE TINYBSD i386
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): text 80x25
CPU: QEMU Virtual CPU version 2.5+ (2491.68-MHz 686-class CPU)
  Origin="AuthenticAMD"  Id=0x663  Family=0x6  Model=0x6  Stepping=3
  Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
  Features2=0x80002001<SSE3,CX16,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x5<LAHF,SVM>
  SVM: NAsids=16
Hypervisor: Origin = "TCGTCGTCGTCG"
real memory  = 134217728 (128 MB)
avail memory = 110227456 (105 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <BOCHS  BXPCAPIC>
arc4random: no preloaded entropy cache
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1245837621 Hz quality 800
random: entropy device external interface
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xdef710, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Ignoring 3 range above 4GB (0x100000000-0x17fffffff)
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc040-0xc04f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xfebf0000-0xfebf0fff at device 2.0 on pci0
vgapci0: Boot video device
em0: <Intel(R) PRO/1000 Network Connection> port 0xc000-0xc03f mem 0xfebc0000-0xfebdffff irq 11 at device 3.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Ethernet address: 52:54:00:12:34:56
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xeb000-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 10.000 msec
ada0 at ata1 bus 0 scbus1 target 0 lun 0
ada0: <QEMU HARDDISK 2.5+> ATA-7 device
ada0: Serial Number QM00003
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 199MB (409216 512 byte sectors)
Trying to mount root from ufs:/dev/ada0s1a [ro]...
random: unblocking device.
Growing root partition to fill device
ada0s1 resized
ada0s1a resized
gpart: arg0 'ada0s1a': Invalid argument
growfs: requested size 168MB is not larger than the current filesystem size 168MB
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
Setting hostuuid: 8cb6a8f0-552d-11eb-a494-b7b4ffce6830.
Setting hostid: 0xc77d4e30.
Starting file system checks:
/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1a: clean, 2613 free (5 frags, 326 blocks, 0.0% fragmentation)
/dev/ada0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s3: clean, 8158 free (6 frags, 1019 blocks, 0.1% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Setting hostname: nanobsd-qemu-i386.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /boot/entropy: Read-only file system
.
lo0: link state changed to UP
em0: link state changed to UP
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=81209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER>
        ether 52:54:00:12:34:56
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
Starting devd.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
power_profile does not exist in /etc/rc.d or the local startup
directories (/usr/local/etc/rc.d), or is not executable
Starting dhclient.
DHCPDISCOVER on em0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 10.0.2.2
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 10.0.2.2
bound to 10.0.2.15 -- renewal in 43200 seconds.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
Setting date via ntp.
12 Jan 23:29:18 ntpdate[470]: step time server 62.149.0.30 offset 0.398950 sec
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Configuring vt: blanktime.
Starting cron.
devmatch: Can't read linker hints file.
Starting background file system checks in 60 seconds.
rm: /firstboot: Read-only file system

Tue Jan 12 23:29:53 UTC 2021

FreeBSD/i386 (nanobsd-qemu-i386) (ttyu0)

login: root
Jan 12 23:29:58 nanobsd-qemu-i386 login[666]: ROOT LOGIN (root) ON ttyu0
FreeBSD 12.1-RELEASE TINYBSD

Welcome to FreeBSD!

Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories:   https://www.FreeBSD.org/security/
FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
FreeBSD FAQ:           https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums:        https://forums.FreeBSD.org/

Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with:  pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.

Show the version of FreeBSD installed:  freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages:  man man
FreeBSD directory layout:      man hier

Edit /etc/motd to change this login announcement.
root@nanobsd-qemu-i386:~ #